Case 2166 Rice Header with 17'6" 1010 with Yoogali Draper Front

Case 2166 Rice Header with 17'6" 1010 with Yoogali Draper Front for sale
4351E and 3469R hours
17.5 foot Yoogali draper front with oil bath knife drive

In approximately Feb 2013 before last rice harvest the following was done;
New elephant ears new wear pads, new stainless vanes and hardened bolts, new rotor bearing
New stainless floor in feeder and new chain and bearings, transition cone patched with stainless
Stainless patches in table auger bed, new top sieve old is still good for a spare
Bubble up auger new flighting and stainless ribbon new bearings and drive uni
Grain tank augers new bearings and flighting where needed and floor patched
Unloading auger new flighting and stainless ribbon and bearings
New cleaning fan belt and thrust bearing new feeder drive belt
In Feb 2012 the following was done;
The clean grain auger bearings the tailings auger bearings were changed
The table auger bearings were changed and gears rotated
Straw spreader bearings were changed and stainless vanes fitted
The beater had new stainless wear strips and bearings
The separator belt was replaced
In Aug 2011 the head and fuel system was serviced by City Trucks
The fuel system was set to 2366 settings 240hp
In Feb 2011 the rotor drive gearbox was serviced by Intersales new seals and bearings
All shaker rubbers were replaced
The concave adjust motor was replaced
At an unknown time;
Stainless upgrades from Yoogali engineering have been done
The cabin air cleaner has been modified and pre-cleaner added
The back axle has been strengthened never broken or cracked tow bar added
Uhf, rotating beacon
30.5 32L on front and 18.4 26 L on rear
It comes with wheat concaves, grates and pegs
Rice concaves, grates and pegs
2 spare rotor belts

This header is crop ready